CLI Guide

Purpose Command Description
To create a virtual disk of RAID
50
raidcfg -ctrl -ac=cvd
-c=slotid -ad=
x:y,x:y,x:y,x:y ,x:y,x
:y -r=50 -sp=x
Creates a virtual disk of maximum size for type RAID 50.
The slot ID in <-c=slotid> and the array disks in <-ad=...>
are obtained from the rst two commands. The drive location is
obtained from the second command.
To create a virtual disk of RAID 6
raidcfg -ctrl -ac=cvd
-c=slotid -ad=
x:y,x:y,x:y,x:y ,x:y,x
:y -r=6 -sp=x
Creates a virtual disk of maximum size for type RAID 6.
The slot ID in <-c=slotid> and the array disks in <-ad=...>
are obtained from the rst two commands. The drive location is
obtained from the second command.
NOTE: The minimum number of drives required to create a
virtual disk of RAID 6 is 4.
To create a virtual disk of RAID
60
raidcfg -ctrl -ac=cvd
-c=slotid -ad=
x:y,x:y,x:y,x:y ,x:y,x
:y -r=60 -sp=x
Creates a virtual disk of maximum size for type RAID 60.
The slot ID in <-c=slotid> and the array disks in <-ad=...>
are obtained from the rst two commands. The drive location is
obtained from the second command.
NOTE: The minimum number of drives required to create a
virtual disk of RAID 60 is 8.
To view all the virtual disks in a
system
raidcfg vdisk
Lists the virtual disks on a system for all RAID controllers.
To view all the virtual disks for a
specic controller
raidcfg vdisk -
c=slotid
Lists all the virtual disks on a specic controller.
The slot ID in <-c=slotid> is obtained from the rst commands.
To delete a specic virtual disk
on a controller
raidcfg vdisk -ac=dvd
-c=slotid -vd= vdiskid
Deletes a specic virtual disk on a controller.
The slot ID in <-c=slotid> is obtained from the rst command
and the vdiskid in <-vd=vdiskid> is obtained from command 10.
220 RAIDCFG