CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
import
autoimport=<0|1>
Example:
A:>raidcfg -ctrl -c=2 -ac=eai -ai=0
Miscellaneous Options
The following table lists all other RAIDCFG options, parameters, and pre-dened arguments.
Table 368. Miscellaneous Optional Parameters
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
any option
-l or logfile <filename>
Logs command line output to a le. The utility either
appends the information to an existing log le or
creates a new le. The log le contains the same
information as standard output. This option is optional
and can be added to the command line in any order
after the mandatory options have been added.
Example:
A:>raidcfg -ctrl -l=log.txt
Controller_ID/Slot_ID: 0
Controller_PCI_ID: 4:2:1
Controller_Name: Dell PERC 6/E
Channels: 2
Virtual_Disks: 0
Firmware Version: V2.8-0[6064]
RAIDCFG Command successful!
-si or silent
NA
Does not display any information on the terminal
console. This option is optional and can be added to
the command line in any order after any mandatory
options have been added.
Example:
A:>raidcfg -ctrl -si
-ver or version
NA
Displays the version number of the RAIDCFG utility.
This option is optional and can be added to the
command line in any order after any mandatory
options have been added.
Example:
A:>raidcfg -ver
RAIDCFG V4.4
Copyright (c) 2002-2014 Dell Inc.
RAIDCFG Command successful!
218 RAIDCFG