CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
NOTE: For clearing secured foreign
conguration, use instantsecureerase
or insecerase. For more details, see
Erasing Encrypted Physical Disk.
Example:
A:>raidcfg -ctrl -c=2 -ac=fgnclr
-ctrl -c=id
-ac=fgnrvr
or
controller
controllerid=id
action=foreignrec
over
NA NA
Recovers the foreign conguration detected in the
selected controller. This feature is supported on PERC
5 and later controllers and is not supported on SAS
controllers.
If you use this argument on a controller that does not
have a foreign conguration, the No Foreign
configuration present in the
controller message is displayed.
Example:
A:>raidcfg -ctrl -c=2 -ac=fgnrvr
Importing Secured Foreign Conguration
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for importing secured foreign conguration of the
virtual disks.
Table 349. RAIDCFG Options for Importing Secured Foreign
Conguration
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=isfc -
pp=passphrase
or
controller
controllerid=id
action=importsecu
reforeignconfig
passphrase=passph
rase
NA NA
Imports the foreign conguration of the virtual disks
secured with the specied passphrase.
Example:
A:>raidcfg -ctrl -c=2 -ac=isfc -
pp=Dell_123
Displaying Foreign Key Ids
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for displaying the foreign key ids of the controller.
208
RAIDCFG