CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters/
Arguments
Description
Encryption Capable: Yes
Secured: No
Sector Size: 512 MB
T10 Protection Info Capable: No
RAIDCFG Command successful!
Blinking And Unblinking Array Disks
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for blinking and unblinking array disks (hard drives).
NOTE: You can also use pdisk or -pd instead of adisk or -ad to specify an array disk.
Table 337. Blinking And Unblinking Array Disks
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ad -ad=
ch:targ,ch:targ ,
... -ac=blink -
c=id or adisk
adisk=
channel:target ,
channel:target ,.
.. -ac=blink
controllerid= id
vdisk=id
NA NA
Blinks the specied physical disks on the specied
controller.
Example:
A:>raidcfg -ad -ad=0:0:1 -ac=blink -
c=4
RAIDCFG Command successful!
-ad -ad=
ch:targ,ch:targ ,
... -ac= unblink
-c=id or adisk
adisk=
channel:target ,
channel:target ,.
.. -ac= unblink
controllerid= id
vdisk=id
NA NA
Unblinks the specied physical disks on the specied
controller.
Example:
A:>raidcfg –ad –ad=0:0:1 –ac=unblink
–c=4
RAIDCFG Command successful!
Enumerating Virtual Disks
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for enumerating virtual disks.
Table 338. Enumerating Virtual Disks
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
—vd or vdisk
NA NA
Lists all the virtual disks for each controller along with
the array disks that make up each virtual disk. This
option is mandatory.
RAIDCFG 199