CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
lun,...
channel:target:
lun,... [or
channel:target:
enclosure,...]
• RAID 0: 100 MB
• RAID 1: 100 MB
• RAID 5: 100 MB
• RAID 6: 100 MB
• RAID 60: 100 MB
• For PERC 7, PERC 8, and PERC 9 controllers:
• RAID 0: 100 MB
• RAID 1: 100 MB
• RAID 5: 100 MB
• RAID 6: 100 MB
• RAID 10: 100 MB
• RAID 50: 100 MB
• RAID 60: 100 MB
• Software RAID controllers:
• RAID 0: 100 MB
• RAID 1: 100 MB
• RAID 5: 100 MB
• RAID 10: 100 MB
NOTE: If this option is not provided,
RAIDCFG determines the maximum virtual
disk size and creates it.
-ctrl -ac=cvd -
c=id -ad=
ch:targ,ch:targ,
... [or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid= id
adisk=
channel:target:
lun,...
channel:target:
lun,... [or
channel:target:
enclosure,...]
-vdpi or
vdiskprotectionin
fo
0,1
Creates a virtual disk with the T10 Protection
Information (PI) feature enabled.
NOTE: This option is supported only on
PERC 9 controllers.
Example:
A:>raidcfg -ctrl -ac=cvd
-c=2
-ad=1:4,1:8 -vdpi=1
RAIDCFG Command successful!
-wp or
writepolicy
wb, wt, wc, nwc, fwb
Sets the write policy for the virtual disk. The valid
arguments are:
• wb — Write-Back caching sets the controller to
send a write-request completion signal as soon as
the data is in the controller cache but has not yet
been written to disk.
• wt — Write-Through caching sets the controller
to send a write-request completion signal only
after the data is written to the disk.
RAIDCFG 195