CLI Guide

Option Sub-option Valid Arguments Description
Powerdown turns o the system.
powercycle
Turns o the system and automatically turns on your
system after a few seconds.
reset
Resets the system.
softshutdown
In Linux, the system turns o immediately.
NOTE: In Windows PE, this option does not
work.
NOTE: This option applies only to
PowerEdge systems that are congured with
a BMC.
NOTE: This argument requires ACPI support
to function properly.
racreset
Table 317. racreset
Option Sub-option Valid Arguments Description
--racreset*
NA NA Resets the RAC. It cannot be accompanied with any
other option. This option cannot be replicated.
serialcfgparams
Table 318. serialcfgparams
Option Sub-option Valid Arguments Description
serialcfgparams
or scp
Congures and displays serial conguration
parameters. This option can be replicated.
--connectionmode basic, terminal
Sets the connection mode used to perform IPMI
messaging to the BMC. This sub-option can be
replicated.
--msgcomm noflowctrl,
rtscts
Sets the IPMI message communication ow
control. This suboption can be replicated.
--msgcommdtrhangup
NA Reports the IPMI message communication DTR
hang-up. This suboption cannot be replicated.
--msgcommbitrate 9600, 19200,
57600, 115200
Sets the IPMI message communication baud rate
in bits per second (bps). This sub-option can be
replicated.
--tmcfglineediting enable, disable
Sets the line editing value for terminal mode
conguration. This sub-option can be replicated.
--tmcfgdelctrl del, bksp
Sets the delete control value for terminal mode
conguration. This sub-option can be replicated.
166 SYSCFG