CLI Guide

Table 314. pefcgparams
Option Sub-option Valid Arguments Description Applicable Systems
pefcfgparams
or pcp
Congures and displays PEF
conguration parameters. This option
can be replicated.
All PowerEdge systems
--filter fanfail,
voltfail,
discretevoltf
ail,
tempwarn,
tempfail,
intrusion,
redundegraded
,redunlost,
procwarn,
procfail,
powerwarn,
powerfail,
hardwarelogfa
il,
autorecovery,
batterywarn,
batteryfail,
powerabsent,
procabsent,
systempowerwa
rn,
systempowerfa
il
Species a PEF value. This sub-option
can be replicated.
For a complete list of all possible PEF
messages along a description of each
event, see BMC Platform Events Filter
Alert Messages
NOTE: The fanfail option is
not supported on PowerEdge
10G systems.
--filteraction powercycle,
reset,
powerdown,
power
reduction,
none
Sets the event lter action for the lter
specied using the filter sub-option.
This sub-option depends on the
filter sub-option. This sub-option
can be replicated.
--hostname <string>
Sets the host name (maximum of 62
printable ASCII characters) for the BMC.
This sub-option can be replicated.
The hostname string must comprise
only the followig characters: hyphen (-) ,
underscore (_) , and period (.) .
The length of the hostname string
must be 62 characters or less for
PowerEdge 9G systems and later.
--filteralert
enable,
disable
Enables or disables alerts for the lter
specied using the lter sub-option. This
sub-option is dependent on the lter
sub-option. This sub-option can be
replicated.
--alertpolnum 1, 2, 3, 4
Species the alert policy entry number.
This sub-option can be replicated.
164 SYSCFG