CLI Guide

embscsi2
Table 256. embscsi2
Valid Arguments
on, off
Description
Turns the second embedded SCSI controller. This option is only valid for supported systems
that have an embedded SCSI controller. This option can be replicated.
Example:
A:>syscfg --embscsi2=on
embscsi2=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embscsiraid
Table 257. embscsiraid
Valid Arguments
raid, off, scsi
Description
Sets the specied value for the SCSI RAID controller. This option is only valid for supported
systems that have SCSI ROMB. Some systems do not support the scsi argument. This
option can be replicated.
CAUTION: If you change the controller from SCSI to RAID mode, data loss may
occur. Backup any data you must save before changing modes.
Example:
A:>syscfg --embscsiraid=raid
embscsiraid=raid
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embscsiraidchb
Table 258. embscsiraidchb
Valid Arguments raid, scsi
Description
Sets the second channel on an embedded RAID controller to SCSI or RAID. This option is
only valid for systems that support RAID/RAID and RAID/SCSI settings for channels A and
B. This option can be replicated.
Example:
A:>syscfg --embscsiraidchb=raid
embscsiraidchb=raid
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
136 SYSCFG