CLI Guide

embhypervisor
Table 250. embhypervisor
Valid Arguments o, on
Description
Turns on or o the embedded hypervisor port.
Example:
A:>syscfg --embhypervisor=on
embhypervisor=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embideraid
Table 251. embideraid
Valid Arguments on, o
Description
Turns on or o the embedded IDE RAID controller. This option is only valid for supported
systems that have IDE ROMB. This option can be replicated.
Example:
A:>syscfg --embideraid=on
embideraid=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embnic1pxe
Table 252. embnic1pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the rst embedded NIC. If
PXE is disabled, the rst NIC is not found in the boot order. If PXE is enabled, the rst NIC
is placed at the end of the boot order. This option is only present on systems that do not
support the embnic1 option. This option can be replicated.
Example:
A:>syscfg --embnic1pxe=enable
embnic1pxe=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
134 SYSCFG