Users Guide

○ T440
○ M640
○ FC640
○ T640
○ C6400
● Added Support for the Precision Rack System:
○ PR7920
● Added support for below Network Cards:
○ Intel Ethernet Network Adptr XXV710-DA2
○ NetXtreme BCM5719/5720 1Gbps devices
○ NetXtreme-E BCM574xx 10Gbps/25Gbps devices
○ Mellanox ConnectX-4 Dual Port 100 GbE QSFP Network Adapter
○ Intel X550 rNDC
○ Intel 10GbE 4P X710
NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems Software Support Matrix at
dell.com/openmanagemanuals.
NOTE: Use both DTK and the Server Administrator from the same release version to get complete supported features of
Server Administrator.
DTKTORACADM
The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize
RACADM in the deployment solution. The utility has the conversion tool for converting the SYSCFG scripts in both
environments: Microsoft Windows and Linux operating systems. Starting 12th generation of PowerEdge servers and later,
selected set of SYSCFG commands are a part of the DTK sample scripts. The list of DTK sample scripts are present
in \Toolkit\Tools\CONVERTER\windows_scripts.lst for Microsoft Windows operating systems and toolkit/
Converter/ linux_scripts.lst for Linux operating system. The converted scripts are available in the folder racscripts.
Table 1. DTKTORACADM Command on Windows Operating System
Valid Arguments dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst debug
Description On systems running Windows operating system, run the command, where
windows_scripts.lst is the input file which contains the list of path to run the
RACADM scripts and debug is an option which list the file status.
Applicable Systems
All PowerEdge 12 and later systems.
Table 2. DTKTORACADM Command on Linux Operating System
Valid Arguments python dtktoracadm.py or python dtktoracadm.py linux_scripts.lst
debug
Description On the system running Linux operating system, in the prompt type the command, where
linux_scripts.lst is the input which contains the list of path to run the RACADM
scripts and debug is an option which list the file status.
Applicable Systems
All PowerEdge 12 and later systems.
The set of converted commands are available in dtktoracadm_dict.map. For more information see, Dell EMC OpenManage
Deployment Toolkit User's Guide or Dell EMC OpenManage Deployment Toolkit Installation Guide. The following table lists the
set of commands available:
Table 3. SYSCFG equivalent RACADM commands
Group SYSCFG Commands Equivalent RACADM Commands
iDRAC Settings
lcp --dnsdhcp iDRAC.IPv4.DNSFromDHCP
lcp --domainname iDRAC.NIC.DNSDomainName
Introduction 7