CLI Guide

Table 185. FailSafeBaud or fsbr (continued)
Description
Sets the console redirection fail safe baud rate in bps. The BIOS attempts to
determine the baud rate automatically. This failsafe baud rate is used only if the
attempt fails.
Example:
A:>syscfg --fsbr=9600
fsbr=9600
Applicable Systems All PowerEdge systems.
RedirAfterBoot
Table 186. RedirAfterBoot
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
Sets the BIOS console redirection to enable or disable when the operating system is
loaded.
Example:
A:>syscfg --RedirAfterBoot=Enabled
RedirAfterBoot=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SerialComm or serialcomm
Table 187. SerialComm or serialcomm
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: on, com1cr,
com2cr, off
● On Dell’s 12th generation PowerEdge and later systems: OnNoConRedir,
OnConRedirCom1, OnConRedirCom2, Off
Description Enables or disables the serial communication devices (Serial Device 1 and Serial
Device 2) in BIOS.
Example:
A:>syscfg --SerialComm=OnNoConRedir
SerialComm=OnNoConRedir
Applicable Systems All Dell’s 12th generation PowerEdge and later systems
SerialPortAddress or serialportaddrsel
Table 188. SerialPortAddress or serialportaddrsel
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: default, alternate
● On Dell’s 12th generation PowerEdge and later systems: Serial1Com1Serial2Com2,
Serial1Com2Serial2Com1, Com1, Com2
98 SYSCFG