CLI Guide

SataPortA or sata0
Table 142. SataPortA or sata0
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: auto, off
● On Dell’s 12th generation PowerEdge and later systems: Off, Auto
Description
Sets the drive type of the selected device to off or auto This option can be
replicated.
Example:
A:>syscfg --sata0=auto
sata0=auto
Applicable Systems All PowerEdge systems
SataPortACapacity
Table 143. SataPortACapacity
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortACapacity
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortADriveType
Table 144. SataPortADriveType
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Indicates the type of device attached to the SATA port.
Example:
A:>syscfg --SataPortADriveType
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortAModel
Table 145. SataPortAModel
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
SYSCFG 85