CLI Guide

RtidSetting
Table 133. RtidSetting
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
When set to Enabled, it allocates more (Requestor Transaction IDs) RTIDs to the
remote socket thereby increasing cache performance between the sockets.
Example:
A:>syscfg --RtidSetting=Enabled
RtidSetting=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
ProcnControlledTurbo
Table 134. ProcnControlledTurbo
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: enable, disable
● On Dell’s 13th generation PowerEdge and later systems: Disabled,
ControlledTurboLimit, ControlledTurboLimitMinus1, ControlledTurboLimitMinus2,
ControlledTurboLimitMinus3
Description
Controls the turbo engagement. Enable this option only if SysProfile is set to
PerfOptimized.
NOTE: The value of n in ProcnControlledTurbo can be 1–4.
Example:
A:>syscfg --Proc1ControlledTurbo=Disabled
Table 134. ProcnControlledTurbo
Applicable Systems On Dell’s 13th generation PowerEdge and later systems
ProcConfigTdp
Table 135. ProcConfigTdp
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: Nominal, Level1, Level2
Description
Configures the Thermal Design Power (TDP).
Example:
A:>syscfg --ProcConfigTdp=Nominal
ProcConfigTdp=Nominal
Table 135. ProcConfigTdp
Applicable Systems On Dell’s 13th generation PowerEdge systems and later systems.
82 SYSCFG