CLI Guide

Table 84. ClusterOnDie (continued)
Description Enables or disables the Cluster On Die option. When enabled, the feature enhances
the performance of the system with two caching agents.
A:>syscfg --ClusterOnDie=Enabled
ClusterOnDie=Enabled
Applicable Systems PowerEdge 12G and later systems
RedundantOsLocation
Table 85. RedundantOsLocation
Valid Arguments
● On systems prior to 14G: NA
Description
Specifies the backup device for the Redundant OS Control feature. When Redundant
OS Boot is set to Enabled, the BIOS will boot to this device.
NOTE: In order for the devices and slots listed below to show up as optional
backup devices, their settings must be as shown:
SD Card Port -- On
Internal USB Port -- On
Embedded SATA -- anything other than Off
PCIe Slot Disablement -- Enabled
Example:
A:>syscfg --RedundantOsLocation
Applicable Systems
PowerEdge 14G and later systems.
Miscellaneous Settings
You can manage the miscellaneous settings using the options in this group.
AssetTag or asset
Table 86. AssetTag or asset
Valid Arguments
● On systems prior to 12G: read-only
● On 12G and later systems: read-only
Description Reports or sets the customer-programmable asset tag number for a system. This
value can be replicated.
NOTE: The Asset Tag is a string assigned to a system, usually by an
administrator, for security or tracking purposes. The Asset Tag can be up to
10 characters long and can contain only printable US-ASCII characters. For more
information on delimiters, see Command Line Option Delimiters.
Example:
A:>syscfg --asset=<ASSETTAG>
asset=ASSETTAG
Applicable Systems All PowerEdge systems except Blade systems
SYSCFG 65