CLI Guide

Table 60. PxeDev n EnDis (continued)
Description
Enables or disables the Preboot Execution Environment (PXE) device. When
enabled, a Unified Extensible Firmware Interface (UEFI) boot option is created for
the PXE device.
NOTE: The value of n in PxeDevnEnDis can be 1–4.
Example:
A:>syscfg --PxeDev1EnDis=Enabled
PxeDev1EnDis=Enabled
Applicable Systems PowerEdge 12G and later systems
PxeDev n Interface
Table 61. PxeDev n Interface
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: read-only
Description
Displays the NIC interface used for the PXE device.
NOTE: The value of n in PxeDevnInterface can be 1–4.
Example:
A:>syscfg --PxeDev1Interface
Applicable Systems PowerEdge 12G and later systems
PxeDev n Protocol
Table 62. PxeDev
n Protocol
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: read-only
Description
Displays the IP version used for the PXE device.
NOTE: The value of n in PxeDevnVlanId can be 1–4.
Example:
A:>syscfg --PxeDev1Protocol
Applicable Systems PowerEdge 12G and later systems
PxeDev n VlanEnDis
Table 63. PxeDev
n VlanEnDis
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the virtual LAN (VLAN) of the PXE device.
SYSCFG 57