CLI Guide

Table 376. RAIDCFG Error Codes and Messages (continued)
Error Code Message
73 Virtual disk resynching failed. Controller busy.
74 Flush Virtual disk's cache failed on controller.
75 Virtual disk partition specified not found.
76 Unsupported cache policy value.
77 Unsupported write policy value.
78 Unsupported read policy value.
79 Cancel initialization on virtual disk failed.
80 Cancel reconstruction on virtual disk failed.
81 Cancel resynchronization on virtual disk failed.
82 The maximum number of virtual disks that can be created has been
reached.
83 The new virtual disk must use only the remaining free space on the array
disks used in the last virtual disk you created. Select all array disks
that are used in the last virtual disk you created.
84 You have selected an array disk that is in a degraded or failed state.
Choose another array disk.
85 Delete the last created virtual disk first.
86 Virtual disk initialized for use and no override requested.
87 Virtual disk type requested is invalid for the attempted operation.
88 Virtual disk Move operation failed. Cannot rename, virtual disk is
already in use.
89 Failover invalid.
90 Virtual disk resynching.
91 Virtual disk resynch failed.
92 Virtual disk reconstruct failed.
93 Cannot format a virtual disk that contains a boot or system partition.
94 Cannot initialize a virtual disk that contains a boot or system
partition.
95 Virtual disk Copy failed.
96 Virtual disk mirror set required.
97 Virtual disk Create - Read-only failed.
98 Virtual disk Create - Read-write failed.
99 Virtual disk - Clear-to-zero failed.
100 Virtual Disk Requires Non Multilevel.
101 Virtual Disk Promote Operation failed.
102 Specified virtual disk has no drive letter assigned to it.
103 Cannot expose virtual disk.
104 Cannot reconfigure virtual disk.
105 Cannot stop the reconfiguration of the virtual disk.
106 SMART report count not supported.
Messages And Codes 227