CLI Guide

Table 373. UPINIT Common Error Codes and Messages (continued)
Error Code Message
10 Error: Invalid size. Size should be a number between 32 and 2000.
11 Error: sysdrmk failed.
12 System Error.
13 Error: Invalid Argument: <argument>
14 Error: Unzip failed.
UPINIT Linux-Specific Error Codes And Messages
The list of error codes and messages are specific to the Linux environment.
Table 374. UPINIT Linux-Specific Error Codes and Messages
Error Code Message
31 Error: Invalid disk specified.
32 Error: Mount failed.
33 Cannot create mount point <mount point>.File exists
34 Error: fdisk failed.
UPINIT Windows PE Specific Error Codes And
Messages
The list of error codes and messages below are specific to the Windows PE environment.
Table 375. UPINIT Windows PE-Specific Error Codes and Messages
Error Code Message
31 Error: DISKPART failed.
32 Error: DISKPART command file not found.
RAIDCFG Error Codes And Messages
The RAIDCFG utility checks your commands for correct syntax when you enter them. When you enter a command, a message
displays stating the results of the command.
Failure Messages
The RAIDCFG utility failure messages provide error codes to help diagnose why some commands do not succeed. See table
below for a list of the error codes and the associated messages.
Table 376. RAIDCFG Error Codes and Messages
Error Code Message
0 RAIDCFG Command successful!
1 Error! Incorrect Syntax.
2 Failure!
224 Messages And Codes