CLI Guide

Table 363. Enabling And Disabling Persistent Dedicated Hot Spares (continued)
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
action=disableper
sistenthotspare
Example:
A:>raidcfg -ctrl -ac=dphs -c=2
RAIDCFG Command successful!
Setting And Displaying The PCIe Link Speed
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for setting and displaying the Peripheral
Component Interconnect Express (PCIe) link speed of the controller.
Table 364. Setting and Displaying the PCIe Link Speed
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
--ctrl -c=id
-ac=spciels -
spd=<2 | 3>
or
controller
controllerid=id
action=setpcielin
kspeed speed=<2 |
3>
NA NA
Sets the PCIe link speed of the controller to PCIe
Generation 2 or 3.
NOTE: Reboot the system to apply the
setting.
Example:
A:>raidcfg -ctrl -c=2 -
ac=spciels -spd=2
RAIDCFG Command successful!
--ctrl -c=id -
ac=gpciels
or
controller
controllerid=id
action=getpcielin
kspeed
NA NA
Displays the PCIe link speed of the controller.
Example:
A:>raidcfg -ctrl -c=2 -
ac=gpciels
RAIDCFG Command successful!
Supported Controllers And Firmware Versions For PCIe Link Speed
The following table lists the controllers and minimum supported firmware versions for PCIe link speed.
Table 365. Supported Controllers And Firmware Versions For PCIe Link Speed
Controllers Component Minimum Supported Versions
PERC H710 H710 Adapter 21.2.0-0007
H710 Mini Monolithic 21.2.0-0007
PERC H710P H710P Adapter 21.2.0-0007
H710P Mini Monolithic 21.2.0-0007
PERC H810 H810 Adapter 21.2.0-0007
RAIDCFG 207