CLI Guide

Table 266. Sub Options And Arguments For tcm Option (continued)
Option Sub-option Arguments Description
Example:
A:>syscfg tcm --
tcmactivation=enabled --tcmclear --
setuppwdoverride
--tcmundoclear
NA
Cancels the result of the tcmclear setting.
Example:
A:>syscfg tcm --
tcmactivation=enabled --tcmundoclear
--setuppwdoverride
Sub Options And Arguments For tpm Option
The following table lists the sub-options and arguments for the tpm option.
Table 267. Sub Options And Arguments For tpm Option
Option Sub-option Arguments Description
tpm --tpmsecurity
off Does not report the presence of TPM to the operating
system.
onwithpbm Directs the BIOS to store the TCG compliant
measurements to the TPM during a POST operation.
onwithoutpbm Directs the BIOS to bypass the preboot measurements.
Example:
A:>syscfg tpm --
tpmsecurity=onwithoutpbm
--setuppwdoverride
--tpmactivation
enabled Enables and activates the TPM feature.
disabled Disables and deactivates the TPM feature.
nochange Does not alter the operational state of the TPM
feature.
Example:
A:>syscfg tpm
--tpmactivation=enabled --
setuppwdoverride
NOTE: You cannot set tpmactivation when
tpmsecurity is set to off.
NOTE: After setting tpmactivation to enabled or
disabled, if you reboot your system, DTK displays
the TPM Configuration Honoured system
will reset and the system reboots
again message and reboots.
NOTE: When you set tpmactivation to enabled
or disabled, DTK displays the value of
SYSCFG 131