CLI Guide

Table 208. ProcTurboMode or turbomode (continued)
Applicable Systems Dell’s 11th generation PowerEdge and later systems running on Intel processors
SysProfile or profile
Table 209. SysProfile or profile
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: maxperformance,
osctl, apc, custom
● On Dell’s 12th generation PowerEdge and later systems: PerfPerWatt
OptimizedOs, PerfPerWatt OptimizedDapc, PerfOptimized, Custom, DenseCfg
Optimized
Description
Configures the system power profile. When set to a mode other than custom, BIOS
will set each option accordingly. When set to custom, you can change setting of
each option.
NOTE: On systems prior to Dell’s 12th generation PowerEdge systems,
profile is a sub-option of power.
Example:
A:>syscfg --profile=maxperformance
profile=maxperformance
Applicable Systems All PowerEdge systems
EnergyEfficientTurbo
Table 210. EnergyEfficientTurbo
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: Enabled, Disabled
Description
Enables or disables the Energy Efficient Turbo (EET). EET is a mode of operation
where the core frequency of a processor is adjusted within the turbo range based on
workload.
Example:
A:>syscfg --EnergyEfficientTurbo=Enabled
EnergyEfficientTurbo=Enabled
Applicable Systems Dell’s 13th generation PowerEdge and later systems
Proc n TurboCoreNum
Table 211. Proc
n TurboCoreNum
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: All, 1, 2, 4, 6, 8, 10, 12,
14, 16, 18
Description
Sets the number of Turbos Boost-enabled cores for a processor. By default, the
maximum number of cores per processor is enabled.
NOTE: The value of n in ProcnTurboCoreNum can be 0–3.
106 SYSCFG