Users Guide

– Mellanox 2port 25GE MEZZ Yondu
• Support Matrix for the controller card:
Table 1. Support Matrix for the controller
Controller type OSD Support with
PowerEdge MX740c
and PowerEdge
MX840c
OSD support with
MX5026s
Virtual Disk, Physical
Disk support with
Compute Backplanes
Virtual Disk, Physical
Disk support using
Mx5016s HDDs
H745P MX Yes No Yes Yes
H730P MX Yes NA Yes NA
HBA330 MX No NA PD = YES ; VD = NO NA
HBA330MMZ No No PD = YES ; VD = NO PD = YES ; VD = NO
NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems Software Support Matrix at dell.com/
openmanagemanuals.
NOTE: Use both DTK and the Server Administrator from the same release version to get complete supported features of Server
Administrator.
DTKTORACADM
The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize RACADM in the
deployment solution. The utility has the conversion tool for converting the SYSCFG scripts in both environments: Microsoft Windows and
Linux operating systems. Starting 12th generation of PowerEdge servers and later, selected set of SYSCFG commands are a part of the
DTK sample scripts. The list of DTK sample scripts are present in \Toolkit\Tools\CONVERTER\windows_scripts.lst for Microsoft Windows
operating systems and toolkit/Converter/ linux_scripts.lst for Linux operating system. The converted scripts are available in the folder
racscripts.
Table 2. DTKTORACADM Command on Windows Operating System
Valid Arguments dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst debug
Description On systems running Windows operating system, run the command, where windows_scripts.lst is the
input le which contains the list of path to run the RACADM scripts and debug is an option which list
the le status.
Applicable Systems
All PowerEdge 12 and later systems.
Table 3. DTKTORACADM Command on Linux Operating System
Valid Arguments python dtktoracadm.py or python dtktoracadm.py linux_scripts.lst debug
Description On the system running Linux operating system, in the prompt type the command, where
linux_scripts.lst is the input which contains the list of path to run the RACADM scripts and debug is
an option which list the le status.
Applicable Systems
All PowerEdge 12 and later systems.
The set of converted commands are available in dtktoracadm_dict.map. For more information see, Dell EMC OpenManage Deployment
Toolkit User's Guide or Dell EMC OpenManage Deployment Toolkit Installation Guide. The following table lists the set of commands
available:
Introduction
7