Users Guide

Script Name Description Associated Files
specied in this le must be specied
before any of the other supporting
scripts can be used.
RAIDCFG.BAT Congures the selected RAID controller
detected in the system.
• TKENVSET.BAT — Used by RAIDCFG.BAT to inform the task scripts
about where to nd the DTK utilities, scripts, and conguration les.
• RAIDCFG.EXE — Used by RAIDCFG.BAT to retrieve RAID
information and congure settings.
PARTCFG.BAT Creates and populates the Dell utility
partition (UP) and the operating system
partition on a specied disk.
• TKENVSET.BAT — Used by PARTCFG.BAT to inform the task scripts
about where to nd the DTK utilities, scripts, and conguration les.
• DISKPART.EXE — Provided by Windows; this script is used to create
partitions on your disk. When creating a Windows PE image, ensure
that the DISKPART.EXE tool is present in the Windows PE image you
created. This script uses the following les for unattended operations:
– UPINIT.BAT— Used by PARTCFG.BAT to create and populate the
Dell utility partition.
– FORMAT.EXE— Provided by Windows to format the partition.
Other scripts for systems running Linux operating systems
The following table lists the other scripts for Linux.
Table 27. Other Scripts for Linux
Script Name Description Associated Files
tkenvset.sh Sets the path for DTK installation and
variables for the system to be deployed
and congured. The variables and paths
in this le must be specied before any
of the other supporting scripts can be
used.
• syscfg — Used by tkenvset.sh to discover the system type.
raidcfg.sh Congures the selected RAID controller
detected in the system.
• tkenvset.sh — Used by raidcfg.sh to inform the task scripts about
where to nd the DTK utilities, scripts, and conguration les.
• raidcfg — Used by raidcfg.sh to retrieve RAID information and
congure settings.
partcfg.sh In BIOS mode, creates and populates
the Dell utility partition and the
deployment partition (MBR type) on a
specied disk. In UEFI mode, creates
deployment partition (GPT type) on a
specic disk. The partcfg.shscript uses
a /tmpfolder to store a few temporary
les critical to its execution.
• tkenvset.sh — Used by partcfg.sh to inform the task scripts about
where to nd the DTK utilities, scripts, and conguration les.
• fdisk — Used to create partitions on your disk in BIOS mode. When
creating an embedded Linux ISO image, make sure that fdisk is
present in the embedded Linux environment you created.
• parted — Used to create partitions on your disk in UEFI mode. When
creating an embedded Linux ISO image, make sure that parted is
present in the embedded Linux environment you created.
This script uses the following le for unattended operations:
• upinit.sh — Used by partcfg.sh to create and populate the Dell utility
partition.
NOTE: Do not modify the upinit.sh script.
Preparing the script les 45