CLI Guide

QpiSpeed
Table 133. QpiSpeed
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: MaxDataRate, 9GTps, 8GTps,
7GTps, 6GTps
Description
Sets the speed of the processor.
Example:
A:>syscfg --QpiSpeed=8GTps
QpiSpeed=8GTps
Applicable Systems Dell’s 12th generation PowerEdge and later systems
RtidSetting
Table 134. RtidSetting
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
When set to Enabled, it allocates more (Requestor Transaction IDs) RTIDs to the remote
socket thereby increasing cache performance between the sockets.
Example:
A:>syscfg --RtidSetting=Enabled
RtidSetting=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
ProcnControlledTurbo
Table 135. ProcnControlledTurbo
Valid Arguments
• On systems prior to Dell’s 13th generation PowerEdge systems: enable, disable
• On Dell’s 13th generation PowerEdge and later systems: Disabled, ControlledTurboLimit,
ControlledTurboLimitMinus1, ControlledTurboLimitMinus2, ControlledTurboLimitMinus3
Description
Controls the turbo engagement. Enable this option only if SysProfile is set to
PerfOptimized.
NOTE: The value of n in ProcnControlledTurbo can be 1–4.
86 SYSCFG