CLI Guide

Error Code Message
68 Create virtual disk failed. Failed to map virtual disk to operating system
disk.
69 Create virtual disk failed. Failed to map virtual disk to operating system
disk.
70 Virtual disk initialization failed.
71 Virtual disk initialization failed. Controller busy.
72 Virtual disk reconstruction failed. Controller busy.
73 Virtual disk resynching failed. Controller busy.
74 Flush Virtual disk's cache failed on controller.
75 Virtual disk partition specified not found.
76 Unsupported cache policy value.
77 Unsupported write policy value.
78 Unsupported read policy value.
79 Cancel initialization on virtual disk failed.
80 Cancel reconstruction on virtual disk failed.
81 Cancel resynchronization on virtual disk failed.
82 The maximum number of virtual disks that can be created has been reached.
83 The new virtual disk must use only the remaining free space on the array
disks used in the last virtual disk you created. Select all array disks that
are used in the last virtual disk you created.
84 You have selected an array disk that is in a degraded or failed state.
Choose another array disk.
85 Delete the last created virtual disk first.
86 Virtual disk initialized for use and no override requested.
87 Virtual disk type requested is invalid for the attempted operation.
88 Virtual disk Move operation failed. Cannot rename, virtual disk is already
in use.
89 Failover invalid.
90 Virtual disk resynching.
91 Virtual disk resynch failed.
92 Virtual disk reconstruct failed.
93 Cannot format a virtual disk that contains a boot or system partition.
94 Cannot initialize a virtual disk that contains a boot or system partition.
95 Virtual disk Copy failed.
96 Virtual disk mirror set required.
97 Virtual disk Create - Read-only failed.
236 Messages And Codes