CLI Guide

Error Code Message
163 Invalid IPv6 address. The Secondary DNS server address specified has
incorrect address format.
164 Invalid IPv6 address. The gateway address specified is invalid.
165 Invalid configuration. Attempting to apply IPv6 configuration on a non
supported platform.
166 Invalid IPv6 configuration. Attempt to set DNS server address manually while
DNS address source is set to auto.
167 Invalid IPv6 configuration. Attempt to set IPv6 address manually while IPv6
address source is set to auto.
168 Invalid IPv6 configuration. Attempting to apply IPv6 configuration without
loading IPv6 stack.
169 Invalid IPv4 configuration. Attempting to apply IPv4 configuration with IPv4
disabled.
170 Invalid IPv6 configuration. Ipv6 address cannot be specified without
specifying prefix-length.
171 Invalid IPv6 configuration. dnssrcv6 cannot be set to auto when ipsrcv6 is
set to manual.
172 Error while executing IPMI Set command.
173 Error while executing IPMI Get command.
174 Error during Trap Alert.
175 Unspecified error.
176 Getting LCD settings failed.
177 Invalid configuration. Attempting to set cap when capenable is set to
disable.
178 Invalid configuration. Attempting to set cap when hardware does not support
setting.
179 Invalid Configuration Option.
180 Cannot execute command. Parameter is illegal because command sub-function
has been disabled or is unavailable.
181 Failed to report the removable flash media redundancy status.
182 Failed to report the Internal SD Module status.
183 Error locating the Virtual Media Key on the Modular system.
184 Error in setting the redundancy option for the Internal SD Modules.
185 Error in retrieving the redundancy option for the Internal SD Modules.
186 Error in setting the redundancy option on Modular systems for the Internal
SD Modules.
187 Error in retrieving the vFlash option.
188 Error in setting the vFlash option.
230 Messages And Codes