CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
-vd -c=id -vd=id
-ac=ci or vdisk
controllerid=id
vdisk=id
action=cancelinit
NA NA
Cancels the initialization of the virtual disk with the
cancelinit command. This feature is supported on
PERC 5 and later controllers and is not supported on
SAS controllers. Using the cancelinit command on
unsupported controllers returns an error..
Example:
A:>raidcfg -vd -c=2 -vd=2 -ac=ci
Resetting The Controller
The following table lists the RAIDCFG options, parameters, and predened arguments for resetting the controller.
Table 363. Resetting The Controller
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=rst or
controller
controllerid=id
action=reset
NA NA
Resets the specied controller.
Example:
A:>raidcfg -ctrl -c=2 -ac=rst
-ctrl -c=id -
ac=rst -force or -
controller -
controllerid=id -
action=reset
force
NA
The parameter force, is optional. This option is used
to reset or delete the BootVD in Post operating
system.
Enabling And Disabling Persistent Dedicated Hot Spares
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for enabling and disabling dedicated hot spares.
Table 364. Enabling And Disabling Persistent Dedicated Hot Spares
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
--ctrl -c=id -
ac=ephs
or
controller
controllerid=id
action=enableperi
stenthotspare
NA NA
Assigns the slot corresponding to the hot spare drive
as persistent. Any drive in the slot functions as a hot
spare if the drive is qualied to be a hot spare.
NOTE: Assign hot spare for a bootable virtual
disk only from the disk drives of slot 0-3 of
the system.
214 RAIDCFG