CLI Guide

Blinking And Unblinking Array Disks
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for blinking and unblinking array disks (hard drives).
NOTE: You can also use pdisk or -pd instead of adisk or -ad to specify an array disk.
Table 338. Blinking And Unblinking Array Disks
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ad -ad=
ch:targ,ch:targ ,
... -ac=blink -
c=id or adisk
adisk=
channel:target ,
channel:target ,.
.. -ac=blink
controllerid= id
vdisk=id
NA NA
Blinks the specied physical disks on the specied
controller.
Example:
A:>raidcfg -ad -ad=0:0:1 -ac=blink -
c=4
RAIDCFG Command successful!
-ad -ad=
ch:targ,ch:targ ,
... -ac= unblink
-c=id or adisk
adisk=
channel:target ,
channel:target ,.
.. -ac= unblink
controllerid= id
vdisk=id
NA NA
Unblinks the specied physical disks on the specied
controller.
Example:
A:>raidcfg –ad –ad=0:0:1 –ac=unblink
–c=4
RAIDCFG Command successful!
Enumerating Virtual Disks
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for enumerating virtual disks.
Table 339. Enumerating Virtual Disks
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
—vd or vdisk
NA NA
Lists all the virtual disks for each controller along with
the array disks that make up each virtual disk. This
option is mandatory.
Example:
A:>raidcfg -vd
Controller: PERC H710P Adapter
VDisk ID: 0
Virtual Disk Name: Virtual Disk 0
Size: 857344 MB (837 GB)
Type: RAID 0
Read Policy: Adaptive Read Ahead
Write Policy: Write Back
198 RAIDCFG