CLI Guide

Option Valid Arguments Description
Example:
A:>syscfg -b 1
The state byte has been set to 1.
A:>syscfg -b 2 -x
The state byte has been set to 0x02.
-r or --read*
NOTE: The
asterisk is not
part of the
command syntax.
NA
Reads the value of state data. When used with the -x option, the value is reported
in hexadecimal format (0xNN).
Example:
A:>sysfg -r -x
The state byte has been set to 0x02.
A:>syscfg -r
The state byte has been set to 2.
-x or --hex
None
Species that a value should be in hexadecimal format.
Example:
A:>sysfg -r -x
The state byte has been set to 0x01.
A:>sysfg -x -b 0x02
The state byte has been set to 0x02.
SYSCFG for System Conguration
SYSCFG enables system conguration and reporting. It reports system identication values, processor types and speeds, memory size, and
detects device using PCI scan.
Options For System Conguration
Table below documents valid options and arguments along with a description of the expected behavior of each option. Options and
arguments are case sensitive. All options and pre-dened arguments are lowercase unless stated otherwise.
NOTE
: Some of the following options or arguments might not be available on all systems. Some of the command line options are
followed by an asterisk. Such options are used for reporting purposes only.
Table 331. SYSCFG Options and Arguments for System Conguration
Option Valid Arguments Description
--asset
None
Reports the customer-programmable asset tag number for a system. This option
displays the asset tag for a system. For Blade systems, the SYSCFG utility reports
the asset tag for both the server module and the asset tag for its chassis. For
more information on delimiters, see Command Line Option Delimiters .
SYSCFG 173