CLI Guide

Option Sub-option Valid Arguments Description
User ID for the serial channel. This option
can be replicated.
--userid
2–16, if your system has
a DRAC 5 controller
Sets the User ID. This sub-option can be
replicated.
--usrprivlmt user, operator,
administrator,noac
cess
Sets the maximum BMC user privilege
level for the serial channel for the User ID
specied using the userid sub-option.
This sub-option can be replicated. This
sub-option is dependent on the userid
sub-option.
--
currentenableduserids
NA Reports the number of currently enabled
User IDs on the serial channel. This sub-
option can be replicated.
--
useridswithfixednames
NA
Reports the number of User IDs with xed
names on the serial channel. This sub-
option can be replicated.
Example 1 (to enable User ID 2 on the
serial channel with administrator
privileges ) :
A:>syscfg serialuseraccess --
userid=2 --
usrprivlmt=administrator
userid=2
usrprivlmt=administrator
status=enable
Example 2 (to enable User ID 4 on the
serial channel with user privileges ):
A:>syscfg serialuseraccess --
userid=4 --usrprivlmt=user
userid=4
usrprivlmt=user
status=enable
solaction
Table 323. solaction
Option Sub-option Valid Arguments Description
solaction
This option enables or disables Serial-Over- LAN
(SOL) access for a particular user. This option can be
replicated.
168 SYSCFG