CLI Guide

Option Sub-option Valid Arguments Description Applicable Systems
--alertpolstatus enable,
disable
Enables or disables the alert policy
specied using the alertpolnum sub-
option. This sub-option can be
replicated. This sub-option is dependent
on the alertpolnum sub-option.
Example: (to set the PEF conguration
parameters):
Example 1 (To congure the PEF so that
the system is powered down in response
to a fan failure event):
A:>syscfg pefcfgparams --
filter= fanfail--
filteraction=powerdown
pefcfgparams filter=fanfail
filteraction=powerdown
Example 2 (To congure the PEF so that
a PEF alert is not sent to the destination
IP address in response to a chassis
intrusion event):
A:>syscfg pefcfgparams --
filter= intrusion--
filteralert=disable
pefcfgparams filter=
intrusion
filteralert=disable
powerbutton
Table 316. powerbutton
Option Sub-option Valid Arguments Description
--powerbutton
NA
enable, disable
Enables or disables the power button. This option can
be replicated.
Example:
A:>syscfg --powerbutton=enable
powerbutton=enable
powerctl
Table 317. powerctl
Option Sub-option Valid Arguments Description
--powerctl
NA
powerdown
Performs a chassis powerdown and controls the reset
of the system.
164 SYSCFG