CLI Guide

mouse
Table 287. mouse
Valid Arguments on, o
Description
Turns the mouse controller on or o.
This option can be replicated.
Example:
A:>syscfg --mouse=off
mouse=off
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
noraidprompt
Table 288. noraidprompt
Valid Arguments NA
Description
Species that the BIOS must not prompt for conrmation when changing the mode of a
RAID controller. This option can only be used with the --embscsiraid or --embscsiraidchb
options.
Without this option, the user is prompted during POST to conrm the change of a RAID
controller from RAID (SCSI) to SCSI (RAID). This option is not replicated.
CAUTION: When changing a RAID controller from SCSI to RAID or from RAID to
SCSI, data is lost on the aected hard drives. The warning message for this data
is not displayed if you use the --noraidprompt option. To avoid data loss, back up
any information on the hard drives before changing the type of controller used
with the drives
Example:
A:>syscfg --embscsiraid=raid --noraidprompt
embscsiraid=raid
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
oldsetuppwd
Table 289. oldsetuppwd
Valid Arguments <string>
Description
Allows to set a new setup password if a setup password is already present on the system.
The setup password locks the BIOS setup screen. The argument string supplied to this
option is the current password. If this password is not correct, the new setup password is
148 SYSCFG