CLI Guide

memdynamicpower
Table 284. memdynamicpower
Valid Arguments enable, disable
Description
Enables or disables the dynamic memory power states. This option can be replicated.
Example:
A:>syscfg --memdynamicpower=enable
memdynamicpower=enable
Applicable Systems PowerEdge systems with Intel Xeon 7500 series
memintleave
Table 285. memintleave
Valid Arguments enable, disable
Description
Enables or disables the memory interleave mode. This option can be replicated.
Example:
A:>syscfg --memintleave=enable
memintleave=enable
NOTE: The memintleave option is same as Nodeinterleave option. For more
information, see Memory Settings group.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
memremap
Table 286. memremap
Valid Arguments o, auto
Description
Sets the memory remapping to o or auto.
Example:
A:>syscfg --memremap=off
memremap=off
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
SYSCFG 147