CLI Guide

hddfailover
Table 278. hddfailover
Valid Arguments o, on
Descriptiono
Species the device in the Hard Disk Drive Sequence menu that has not been attempted in
the boot sequence. When set to on, all devices are attempted in an order in which they are
congured. When set to o, only the rst device in the hard disk sequence is attempted.
This option can be replicated.
Example:
A:>syscfg --hddfailover=on
hddfailover=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
hpcmode
Table 279. hpcmode
Valid Arguments enable, disable
Description
Enables or disables the High Performance Computing (HPC) Mode. When set to enable,
the HPC is enabled utilizing only the high frequency P-State settings. When set to disable
(default value), all P-States inherent to the CPU are used.
To fully enable HPC Mode, set the power management to custom, cpu power and
performance management to OsDbpm, and fan power and performance management to
maximum performance.
Example:
A:>syscfg --hpcmode=enable
hpcmode=enable
Applicable Systems All systems prior to PowerEdge 12G systems with AMD Opteron 6200 series processor
htassist
Table 280. htassist
Valid Arguments enable, disable
Description
Enables or disables the Probe Filter chipset option. Some applications may have lower
performance when the chipset feature is disabled.
Example:
A:>syscfg --htassist=enable
htassist=enable
SYSCFG 145