CLI Guide

Option Sub-option Arguments Description
If power proles are not available on the platform, an error
message is displayed.
A:>syscfg power--profile=maxperformance
--setuppwdoverride
custom
Creates the custom prole. Reboot the system for the
settings to take eect.
A:>syscfg power --profile=custom --
setuppwdoverride
--cpupowermode
min, max, osdbpm,
systemdbpm
Allows you to set the CPU power and performance
management to minimum power, maximum performance,
operating system DBPM, or system DBPM mode.
Example:
A:>syscfg power --profile=custom --
cpupowermode=min --setuppwdoverride
--memorypowermode
min, 978, 800, 1067, 1333,
max
Allows you to set memory power and performance
management to minimum power mode, maximum power
mode, 978 Mhz, 800 Mhz, 1067 Mhz, or 1333 Mhz.
A:>syscfg power --profile=custom --
memorypowermode=min --setuppwdoverride
--fanpowermode
min, max
Allows you to set the fan algorithm to the minimum power
optimized or maximum performance optimized mode.
A:>syscfg power --profile=custom --
fanpowermode=min --setuppwdoverride
NOTE: Set the value of prole to custom to change
the values of cpupowermode ,
memorypowermode , and fanpowermode.
--profile
NA
Displays the prole set and the respective prole
parameters.
--cap
NOTE: This option
is available only
with the
appropriate
installed license.
Displays the values of budgetcap, and the maximum and
minimum power thresholds in Watts.
--cap<budgetcap>
--unit<unit>
NOTE: This option
is available only
with the
appropriate
installed license.
<budgetcap> is the limit
for power consumption in
Watts, or btuphr, or
percent.
<unit> is the unit of the
<budgetcap> value and
can be watt, or btuphr, or
percent.
The value of <budgetcap> must be between the maximum
and minimum threshold values, else an error is displayed. If
the value is less than the minimum threshold value, a
warning message appears.
If the unit is btuphr, it is converted in to Watts using the
formula Watt = BTU/hr /3.413. If the unit is percent, the
formula is Power Cap (Watts) = [Power supply rating for
input power (Watts) - Min potential power (Watts)] *
Power Cap (%) + Min potential power (Watts)]
138 SYSCFG