CLI Guide

embnic2pxe
Table 254. embnic2pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the second embedded NIC. If
PXE is disabled, the second NIC is not found in the boot order. If PXE is enabled, the
second NIC is placed at the end of the boot order. This option is only present on systems
that do not support the embnic2 option. This option can be replicated.
Example:
A:>syscfg --embnic2pxe=enable
embnic2pxe=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embnics
Table 255. embnics
Valid Arguments enable, disable
Description
Turns both the embedded NICs on or o. This option is only present on systems that do not
support the embnic1 and embnic2 options. This option can be replicated.
Example:
A:>syscfg --embnics=enable
--embnics=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embscsi1
Table 256. embscsi1
Valid Arguments
on, off
Description
Turns the rst embedded SCSI controller. This option is only valid for supported systems
that have an embedded SCSI controller. This option can be replicated.
Example:
A:>syscfg --embscsi1=on
embscsi1=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
134 SYSCFG