CLI Guide

TpmCommand
Table 234. TpmCommand
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: None, Activate, Deactivate, Clear
Description
Congures the Trusted Platform Module (TPM).
• None
— Commands are not sent to the TPM.
• Activate — TPM is enabled.
•
Deactivate — TPM is disabled.
• Clear — All the contents of TPM are cleared.
NOTE: This eld is read-only when TpmSecurityis set to Off.
CAUTION: Clearing TPM results in loss of all keys in the TPM. This could aect
booting to operating system.
Example:
A:>syscfg --TpmCommand=Activate
Applicable Systems PowerEdge 13G and later systems
SecureBoot
Table 235. SecureBoot
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled.
Description
Enables the BootSeqRetry feature. When set to Enabled, the system re-attempts the
boot sequence after a 30-second timeout, if the last boot attempt has failed.
Example:
A:>syscfg --SecureBoot=Enabled
SecureBoot=Enabled
Applicable Systems PowerEdge 12G and later systems
SecureBootPolicy
Table 236. SecureBootPolicy
Valid Arguments
• On systems prior to 12G: NA
SYSCFG 123