CLI Guide
IntelTxt or inteltxt
Table 219. IntelTxt or inteltxt
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: On, O
Description
Turns the Trusted Execution Technology on or o. To enable Intel TXT, VT must be enabled,
and the TPM must be enabled with pre-boot measurements and activated.
Example:
A:>syscfg --inteltxt=enable
inteltxt=enable
NOTE: To enable the Intel TXT option in a supported processor, make sure that
the:
• Virtualization technology in Processor setting is enabled.
• TPM module is installed and initialed as OK by BIOS.
• TPM security in System security is set to on with pre-boot measurements.
• User password is not set.
Applicable Systems All PowerEdge 11G and later systems with Intel processors.
NmiButton or nmibutton
Table 220. NmiButton or nmibutton
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the Non-Maskable Interrupt (NMI) button on the front panel. The NMI
button can be used to alert the operating system in certain cases.
NOTE: This option congures Baseboard Management Controller (BMC) and
Remote Access Controller (RAC) settings.
Example:
A:>syscfg --nmibutton=enable
nmibutton=enable
Applicable Systems PowerEdge 11G and later systems
PasswordStatus or pwdlock
Table 221. PasswordStatus or pwdlock
Valid Arguments
• On systems prior to 12G: lock, unlock
SYSCFG 117