CLI Guide

ProcC1E or cpucle
Table 206. ProcC1E or cpucle
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: enable, disable
• On Dell’s 12th generation PowerEdge systems and later systems: Enabled, Disabled
Description
Enables or disables C1-E. By default, it is enabled. This option can be replicated.
Example:
A:>syscfg --cpucle=enable
cpucle=enable
Applicable Systems On Dell’s 11th generation PowerEdge systems and later systems
ProcCStates or cstates
Table 207. ProcCStates /or cstates
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems
: enable, disable
• On Dell’s 12th generation PowerEdge and later systems
: Enabled, Disabled
Description Enables or disables the power c states of the processor. When enabled, the processor can
operate in all available power states.
A:>syscfg --cstates=enable
cstates=enable
Applicable Systems On Dell’s 12th generation PowerEdge and later systems
ProcPwrPerf or cpupowermode
Table 208. ProcPwrPerf or cpupowermode
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: min, max, osdbpm,
systemdbpm
• On Dell’s 12th generation PowerEdge and later systems: MaxPerf, MinPwr, SysDbpm,
OsDbpm
Description
Sets CPU Power Management to maximum performance, operating system DBPM, or
System DBPM (DAPC).
NOTE: The cpupowermode option is a suboption of Power.
112 SYSCFG