Release Notes

Microsoft Windows Server 2012 R2 Foundation, Essentials, Standard, and Datacenter editions
Microsoft Windows Server 2016 Essentials, Standard, and Datacenter editions
What’s New
The new features for this release include:
Below DTK features newly added:
Post OS driver installation through LC driver pack using DTK WinPE image
Added support for Lockdown mode
Secureboot Enablement
Racadm converter to support more token
OS deployment in AHCI non-raid mode
OS deployment through HBA330 mini
Support added for OS deployment on greater than 2TB (raid and non-raid in UEFI Mode)
Support for OS deployment on SSD (SATA/SAS) harddisk
Support added for OS deployment on harddisk connected to Rear backplane
Added support for Software RAID NvMe device (Windows)
Added support for OS deployment using s140 SWRAID controller
Added support for PERC 10 controllers
Support for the following network cards:
Emulex LightPulse LPe31000-M6-D 1-Port 16Gb Full Height Fibre Channel Adapter
Emulex LightPulse LPe31000-M6-D 1-Port 16Gb Low Profile Fibre Channel Adapter
Emulex LightPulse LPe31002-M6-D 2-Port 16Gb Full Height Fibre Channel Adapter
Emulex LightPulse LPe31002-M6-D 2-Port 16Gb Low Profile Fibre Channel Adapter
Mellanox ConnectX-4 Dual Port EDR VPI QSFP28 Low Profile Adapter
Mellanox ConnectX-4 Dual Port EDR VPI QSFP28 Full Height Network Adapter
Mellanox ConnectX-4 Single Port EDR VPI QSFP28 Low Profile Adapter
Mellanox ConnectX-4 Single Port EDR VPI QSFP28 Full Height Network Adapter
Added support for the following Dell PowerEdge servers:
M640
M640VRTX
FC640
T640
R540
R440
T440
NOTE:
For the list of supported operating systems and Dell servers, see the
Dell Systems Software Support Matrix
at
dell.com/openmanagemanuals.
Important Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
DTK operating system deployment limitation:
DTK does not support operating system deployment, when multiple boot VDs exist on a single controller or when the server has multiple
boot controllers. If multiple boot controllers exist on the server, the boot VD must be created on any one of the controllers, and the boot
VD must be set as first boot device in system BIOS.
On debranded or rebranded servers, Deployment toolkit is not supported.
NOTE:
During booting WInPE ISO image for Windows PE 5.1 and Windows PE 10.0 user will not be prompted for entering any
key to continue.
Dell EMC OpenManage Deployment Toolkit 6.0.2 for Microsoft Windows Preinstallation Environment Release Notes 3