Users Guide

• Support for the following PowerEdge servers:
– PER740
– PER740XD
– PER640
– PEC6420
– R940
• Added Support for the Precision Rack System:
– PR7920
• Added support for below Network Cards:
– NetXtreme BCM5719/5720 1Gbps devices
– NetXtreme-E BCM574xx 10Gbps/25Gbps devices
– Mellanox ConnectX-4 Dual Port 100 GbE QSFP Network Adapter
– QLogic 10GE BASE-T 2Port PCIe FH/LP
– QLogic 10GE SFP+ 2Port PCIe FH/LP
– QLogic 25GE SFP28 2Port PCIe FH/LP
– Intel X550 rNDC
– Intel 10GbE 4P X710
NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems Software Support Matrix at
dell.com/openmanagemanuals.
NOTE: Use both DTK and the Server Administrator from the same release version to get complete supported features of
Server Administrator.
NOTE: The Lockdown mode feature can be enabled or disabled through the iDRAC Command line prompt or Graphical
User Interface mode.
DTKTORACADM
The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize RACADM in the
deployment solution. The utility has the conversion tool for converting the SYSCFG scripts in both environments: Microsoft
Windows and Linux operating systems. Starting 12th generation of PowerEdge servers and later, selected set of SYSCFG commands
are a part of the DTK sample scripts. The list of DTK sample scripts are present in \Toolkit\Tools\CONVERTER\windows_scripts.lst
for Microsoft Windows operating systems and toolkit/Converter/ linux_scripts.lst for Linux operating system. The converted scripts
are available in the folder racscripts.
Table 1. DTKTORACADM Command on Windows Operating System
Valid Arguments dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst debug
Description On systems running Windows operating system, run the command, where windows_scripts.lst is
the input le which contains the list of path to run the RACADM scripts and debug is an option
which list the le status.
Applicable Systems
All PowerEdge 12 and later systems.
Table 2. DTKTORACADM Command on Linux Operating System
Valid Arguments python dtktoracadm.py or python dtktoracadm.py linux_scripts.lst
debug
Description On the system running Linux operating system, in the prompt type the command, where
linux_scripts.lst is the input which contains the list of path to run the RACADM scripts and
debug is an option which list the le status.
Applicable Systems
All PowerEdge 12 and later systems.
7