Users Guide

• Integrating The DTK Directory Structure
• Creating A Bootable Media For WIN PE 5.0
• Running The Image
Creating and customizing images for Windows PE 5.1
If you are using Windows 5.1, download Windows Assessment and Deployment Kit (ADK) from microsoft.com. By default, Windows
ADK is copied to the C:\Program Files\Windows Kits directory.
Integrating DTK directory structure
DTK provides WINPE5.x_driverinst.BAT (for Windows PE 5.1), and WINPE10.x_driverinst.BAT scripts to pre-install the Dell drivers
into a base Windows PE 5.1 and Windows PE 10.0 images. To execute the script (for example, WINPE10.x_driverinst.BAT) on 64-bit
systems:
NOTE: Make sure that you have administrator privileges before running the scripts.
1. At the command prompt, type the following command to change the directory to the location of the script,
WINPE10.x_driverinst.BAT : cd C:\Dell\x64\Drivers\winpe10.x
2. Execute the script: WINPE10.x_driverinst.BAT <WIMPATH> <DTKPATH>
where <WIMPATH> is the destination path to create the directory structure for Windows PE and <DTKPATH> is the path for
the Dell drivers in the extracted DTK toolkit. For example,
WINPE10.x_driverinst.BAT C:\winpe_10 C:\DELL
\x64\DRIVERS.
This pre-installs the Dell drivers into Windows PE image. The successful execution of the above commands creates a bootable
ISO image for Windows PE 5.1 and 10.0 at <WIMPATH>.
NOTE: The destination folder (C:\winpe_10) is created as part of the process, and must not be an existing directory.
The destination path and the path to the Dell drivers must not contain any blank space.
Creating a bootable media for Windows PE 5.0
To create a bootable media:
1. Click Start and navigate to All Programs → Microsoft Windows ADK.
2. Click Windows PE Tools Command Prompt to open a command prompt window.
3. Navigate to C:\program les\Windows AIK\Tools\amd64 directory on the system.
4. Execute the script: WINPE5.0_driverinst.bat <WIMPATH> <DTKPATH>
where <WIMPATH> is the destination path to create the directory structure for Windows PE and <DTKPATH> is the path for
the Dell drivers in the extracted DTK toolkit. For example, WINPE5.0_driverinst.bat C:\winpe_50 C:\DELL
\x64\DRIVERS.
This pre-installs the Dell drivers into Windows PE image. The successful execution of the above commands creates a bootable
ISO image for Windows PE 5.0 at <WIMPATH>.
NOTE: The destination folder (C:\winpe_50) is created as part of the process, and must not be an existing directory.
The destination path and the path to the Dell drivers must not contain any blank space.
5. NOTE: The execution script contains the following step, you can skip running the command.
Run the following command: oscdimg -n -bc:\winpe_50\etfsboot.com c:\winpe_50\ISO c:
\winpe_50\WinPE5.0.iso
WinPE5.0 iso, a media bootable ISO image is created.
You can use any CD or DVD burning software to burn the image onto a CD or DVD. After burning the ISO image, ensure that it boots
from the CD or DVD drive for all the supported Dell systems you plan to deploy. After it boots, you are advised to test all the tools
and scripts on these systems to make sure that the integration is successful and that there are no issues with hardware components
not being recognized.
52