Users Guide

Toolkit Components Purpose

unchanged_tokens.log

Displays the RACADM scripts logs which are not converted.

System utilities and supported les For Linux

The following table lists the les, at /opt/dell/toolkit/bin and the supporting libraries located in /opt/dell/toolkit/lib on systems

running the Linux operating system. The les are the core tools (utilities) that perform preoperating system conguration and

deployment tasks. See the Dell EMC OpenManage Deployment Toolkit Command Line Interface Reference Guide at dell.com/

openmanagemanuals for complete information about the capabilities of each DTK utility.

Table 11. System Utilities and Supported Files for Windows

Toolkit Components Purpose

pci.ids Used with syscfg to report PCI devices.

racadm Wrapper script, which invokes racadm5, or racadm6 depending on the Remote Access

Controller (RAC) on your system.

racadm5 Congures DRAC 5 RACs.

racadm6 Congures iDRAC 6.

NOTE: This feature may not be supported on all systems.

racadm7 Congures iDRAC7.

racadm8 Congures iDRAC8.

raidcfg Creates and reports RAID information.

RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.

stsvc.ini Conguration le used by raidcfg.

syscfg

• Reports and congures BIOS, BMC, and DRAC.

• Maintains the system state between reboots.

• Reports hardware devices and other system-related information.

SyscfgErrorCodes.txt Lists the error codes and messages for the syscfg tool.

sys.ini An .ini le used with syscfg.

UpinitErrorCodes.txt Lists the error codes and messages for upinit.sh.

Converter Has the sample utility using python script. Type in the terminal python dtktoracadm.py

command to convert the SYSCFG scripts to equivalent RACADM scripts.

linux_scripts.lst

Displays the list of input SYSCFG sample scripts available to be converted to RACADM

scripts.

For example, in the prompt type the command: python dtktoracadm.py

linux_scripts.lst. The command converts the list of sample.sh les in the input

le.

racscripts The racscripts folder is empty before running the utility. After the python script is run,

the SYSCFG scripts converted to equivalent RACADM scripts are at /opt/dell/toolkit/

Converter/racscripts.

changed_tokens.log

Displays the converted RACADM scripts log.

unchanged_tokens.log

Displays the RACADM scripts logs which are not converted.

SYSCFG equivalent RACADM commands

The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize RACADM in the

deployment solution. Starting 12th generation of PowerEdge servers and later, selected set of SYSCFG commands are a part of the

DTK sample scripts. The utility has the conversion tool for converting the SYSCFG scripts in both environments Microsoft Windows