Users Guide

Command Line Interface Reference Guide at dell.com/openmanagemanuals for complete information about the capabilities of each
DTK utility.
Table 10. System Utilities and Supported Files for Windows
Toolkit Components Purpose
mr2kserv.exe
Service required to run raidcfg.exe functions.
raidcfg.exe
Creates and reports Redundant Array of Independent Disks (RAID) information.
syscfg.exe
• Reports and congures
– BIOS settings and options
– BMC settings and options
– RAC 5 settings and options
– iDRAC settings and options
• Maintains system state between reboots.
• Reports hardware devices and other system-related information.
sysdrmk.exe
Used by UPINIT.BAT to patch the boot sector and Master Boot Record (MBR).
cong.ini
Conguration le used by raidcfg.exe.
CAUTION: Do not edit this le. Incorrect edits might cause raidcfg.exe to fail.
stsvc.ini
Conguration le used by raidcfg.exe.
CAUTION: Do not edit this le. Incorrect edits might cause raidcfg.exe to fail.
sys.ini
Conguration le used by DTK for deployment.
IDRAC
Congures iDRAC 6.
NOTE: This feature may not be supported on all systems.
IDRAC7
Congures iDRAC7.
NOTE: This feature may not be supported on all systems.
RAC 5
Congures DRAC 5/iDRAC.
pci.ids
Reports PCI devices when used with syscfg.exe.
disclaimer.txt
Displays the disclaimer for the tools.
RaidcfgErrorCodes.txt
Lists the error codes and messages for the raidcfg.exe tool.
SyscfgErrorCodes.txt
Lists the error codes and messages for the syscfg.exe tool.
CONVERTER
Has the utility dtktoracadm.exe to convert the SYSCFG scripts to equivalent RACADM
scripts. The le is located in Toolkit\Tools\CONVERTER.
dtktoracadm_dict.map
Displays the list of SYSCFG commands converted to equivalent RACADM commands.
windows_scripts.lst
Displays the list of input SYSCFG sample scripts available to be converted to RACADM
scripts.
For example, in the prompt, type the command: dtktoracadm.exe
windows_scripts.lst. The command converts the list of sample .BAT les in the
input le.
racscripts
The racscripts folder is empty before running the utility command. After the .exe script is
run, the SYSCFG scripts converted to equivalent RACADM scripts are available in this
folder.
changed_tokens.log
Displays the converted RACADM scripts log.
23