Users Guide
Table 5. Supporting Tools and System Files for Windows
Additional Tools Purpose Source
Windows ADK for Windows Server
2012 R2 and Windows 8.1 (64-bit)
Create a bootable media for Windows PE
5.1.
microsoft.com
Windows ADK for Windows Server
2016 and Windows 10.0 (64-bit)
Create a bootable media for Windows PE
10.0.
microsoft.com
The following table is a matrix of Linux system les and other tools to use with DTK utilities and its sample scripts.
Table 6. Supporting Tools and System Files for Linux
Additional Tools Purpose Source Save in DTK location
mkfs.* Formats hard-drive partitions. Any system running the Linux
operating system.
In the PATH variable.
fdisk To create Master Boot Record
(MBR) partitions in BIOS mode.
Any system running the Linux
operating system.
In the PATH variable.
parted To create GUID Partition Table
(GPT) in UEFI mode.
Any system running the Linux
operating system.
In the PATH variable.
unzip To unzip les in Linux. Any system running the Linux
operating system.
In the PATH variable.
upimg Contains system-specic Dell
utility partition les.
NOTE: In the previous
releases, each Dell system
required a unique upimg
le. The upimg le is
common for all Dell
systems.
/opt/dell/toolkit/systems, or the
Dell Systems Build and Update
Utility on the Dell Systems
Management Tools and
Documentation DVD.
/opt/dell /toolkit/ systems
kernel image Used during a Linux unattended
installation.
Available on the Linux media. /opt/dell /toolkit /systems/linux
initial ramdisk Used during a Linux unattended
installation.
NOTE: For legacy
operating systems, you
may need to use the
driver disk. At the end of
the Red Hat Enterprise
Linux Server installation,
you may need to install
the drivers available on
the Systems Build and
Update Utility.
Available on the Linux operating
system media or on the Systems
Build and Update Utility on the
Dell Systems Management Tools
and Documentation DVD.
/opt/dell /toolkit /systems
Deploying operating systems
After the system hardware is versioned and congured, an operating system can be installed using unattended setup les, samples of
which are provided as part of DTK. The sample conguration les are operating system specic, and have been enhanced for Dell
systems. For information on modifying the sample conguration les, see your operating system documentation.
DTK Utilities (SYSCFG and RAIDCFG) and scripts (sample) supports Windows PE 5.1, and Windows PE 10.0. For Microsoft WinPE
and OS deployment limitations, see technet.microsoft.com/en-us/library/hh824993.aspx.
DTK helps to deploy the Microsoft Windows Server operating systems in BIOS and UEFI mode, for supported OS information refer
Supported operating systems.
17