Release Notes

• Microsoft Windows Server 2012 R2 Foundation, Essentials, Standard, and Datacenter editions
• Microsoft Windows Server 2016 Essentials, Standard, and Datacenter editions
What’s New
The new features for this release include:
• Below DTK features newly added:
• Post OS driver installation through LC driver pack using DTK WinPE image
• Added support for Lockdown mode
• Secureboot Enablement
• Racadm converter to support more token
• OS deployment in AHCI non-raid mode
• OS deployment through HBA330 mini
• Support added for OS deployment on greater than 2TB (raid and non-raid in UEFI Mode)
• Support for OS deployment on SSD (SATA/SAS) harddisk
• Support added for OS deployment on harddisk connected to Rear backplane
• Added support for Software RAID NvMe device (Windows)
• Added support for OS deployment using s140 SWRAID controller
• Added support for PERC 10 controllers
• Added support for the following Dell PowerEdge servers:
• PER740
• PER740XD
• PER640
• PER940
• PEC6420
• PR7920
NOTE:
For the list of supported operating systems and Dell servers, see the Dell Systems Software Support Matrix at
dell.com/openmanagemanuals.
Important Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
DTK operating system deployment limitation:
DTK does not support operating system deployment, when multiple boot VDs exist on a single controller or when the server has multiple
boot controllers. If multiple boot controllers exist on the server, the boot VD must be created on any one of the controllers, and the boot
VD must be set as first boot device in system BIOS.
On debranded or rebranded servers, Deployment toolkit is not supported.
NOTE:
During booting WInPE ISO image for Windows PE 5.1 and Windows PE 10.0 user will not be prompted for entering any
key to continue.
SYSCFG
• Some options may not be present on all systems, which may be due to the BIOS version or hardware feature set. The usage
information generated by running SYSCFG without arguments shows only those options that are valid for your system.
• The --devseq option is present only if you have an available, bootable hard-disk partition. If this option is present in the configuration
file, but not present on your system, you will receive a usage error.
• It is required to perform a warm reboot after applying the SYSCFG settings changes on Dell PowerEdge 12th generation of
PowerEdge systems.
• If you perform operations that change the "--redmem" option, reboot your system immediately. It is applicable to both command line
and "--infile" usage.
Dell EMC OpenManage Deployment Toolkit 6.0.1 for Microsoft Windows Preinstallation Environment Release Notes
3