Install Guide

18. Run the script W2K12INST.BAT or W2K16INST.BAT to install the required version of the Windows Server operating system.
Alternative command while running the script W2K12INST.BAT w2012r2_64 for Windows Server 2012 R2 or W2K16INST.BAT
w2016_64 for Windows Server 2016.
NOTE: Post OS necessary drivers are installed from LC maser partition using this command. Latest LC driver pack
should be installed while running this command.
19. Select the required operating system. The operating system installation starts and goes on unattended.
After the operating system is installed, the Set Up Windows screen is displayed.
Converting to RACADM and installing Windows server Operating System using RACADM
scripts
To convert from DTK to RACADM deployment and to install Windows Server operating system using RACADM scripts:
NOTE: Using RACADM scripts is an alternative method to install Windows server operating system. This feature is
supported on Dell’s 12th generation of PowerEdge Servers and later systems. For information see,
Dell EMC
OpenManage Deployment Toolkit User’s Guide or Dell EMC OpenManage Deployment Toolkit Command Line Interface
Reference Guide available at dell.com/openmanagemanuals .
1. Follow the steps 1 to 15 from the section Installation of Windows server operating system using DTK.
2. On the target system, navigate to \Toolkit\Tools\CONVERTER and run dtktoracadm.exe or dtktoracadm.exe
windows_scripts.lst
, where windows_scripts.lst is the input le which contains the list of script les to be converted to
equivalent RACADM scripts.
3. The converted RACADM scripts are available in \Toolkit\Tools\CONVERTER\racscripts.
4. Navigate to \Toolkit\Tools\CONVERTER\racscripts, run the converted TKENVSET.BAT, to set the DTK paths and options.
5. Set the environment variable DT_DRIVE=Z:.
6. Run the script ( W2K12INST.BAT or W2K16INST.BAT), to install the required version of Windows Server operating system.
Alternative command while running the script W2K12INST.BAT w2012r2_64 for Windows Server 2012 R2 or W2K16INST.BAT
w2016_64 for Windows Server 2016.
NOTE: Post OS necessary drivers are installed from LC maser partition using this command. Latest LC driver pack
should be installed while running this command.
7. Select the required operating system. The operating system installation starts and goes on unattended.
After the operating system is installed, the Set Up Windows screen is displayed.
Installing Windows client operating system using DTK
To install Windows client operating system using DTK:
1. On the source system, create an operating system-specic folder.
For example, WinClient_deploy.
2. Make WinClient_deploy folder shareable.
3. In the folder WinClient_deploy, create two folders sources and platform name (for example, PR7920).
NOTE: The platform name must be a DTK standard name. To know the platform name, run TKENVSET.BAT located
in the
x:\Dell\Toolkit\Template\Scripts directory, and then run the SET command. In the Details section, see the
DT_PLATFORM name.
4. Copy the contents of the operating system media to the sources folder.
5. In the folder PR7920, create a folder Out-of-Box Driver.
6. Boot the target system with DTK Windows PE image.
7. Check the RAID controllers on the target system using the command raidcfg –ctrl.
8. Create a virtual disk using the command raidcfg –ctrl –ac=cvd –c=<Controller_ID> -ad=<Array_Disks>
9. From support.dell.com, download the driver for the server.
10. Copy the extracted driver le to Out-of-Box Drivers folder on the source system.
7