CLI Guide

Example:
A:>syscfg --MonitorMwait=Enabled
MonitorMwait=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
PowerSaver
Table 204. PowerSaver
Valid Arguments
• On systems prior to Dell’s 13th generation PowerEdge systems: NA
• On Dell’s 13th generation PowerEdge and later systems: Enabled, Disabled
Description
Enables or disables the power-saving Dell Active Power Controller (DAPC) algorithm.
Example:
A:>syscfg --PowerSaver=Enabled
PowerSaver=Enabled
Applicable Systems Dell’s 13th generation PowerEdge and later systems
ProcC1E/cpucle
Table 205. ProcC1E/cpucle
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: enable, disable
• On Dell’s 12th generation PowerEdge systems and later systems: Enabled, Disabled
Description
Enables or disables C1-E. By default, it is enabled. This option can be replicated.
Example:
A:>syscfg --cpucle=enable
cpucle=enable
Applicable Systems On Dell’s 11th generation PowerEdge systems and later systems
ProcCStates / cstates
Table 206. ProcCStates / cstates
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems
: enable, disable
• On Dell’s 12th generation PowerEdge and later systems
: Enabled, Disabled
Description Enables or disables the power c states of the processor. When enabled, the processor
can operate in all available power states.
A:>syscfg --cstates=enable
cstates=enable
Applicable Systems On Dell’s 12th generation PowerEdge and later systems
ProcPwrPerf / cpupowermode
Table 207. ProcPwrPerf / cpupowermode
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: min, max, osdbpm,
systemdbpm
91