CLI Guide

Example:
A:>syscfg --fsbr=9600
fsbr=9600
Applicable Systems All PowerEdge systems.
RedirAfterBoot
Table 186. RedirAfterBoot
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
Sets the BIOS console redirection to enable or disable when the operating system is
loaded.
Example:
A:>syscfg --RedirAfterBoot=Enabled
RedirAfterBoot=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SerialComm / serialcomm
Table 187. SerialComm / serialcomm
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: on, com1cr, com2cr,
o
• On Dell’s 12th generation PowerEdge and later systems: OnNoConRedir,
OnConRedirCom1, OnConRedirCom2, O
Description Enables or disables the serial communication devices (Serial Device 1 and Serial Device
2) in BIOS.
Example:
A:>syscfg --SerialComm=OnNoConRedir
SerialComm=OnNoConRedir
Applicable Systems All Dell’s 12th generation PowerEdge and later systems
SerialPortAddress / serialportaddrsel
Table 188. SerialPortAddress / serialportaddrsel
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: default, alternate
• On Dell’s 12th generation PowerEdge and later systems: Serial1Com1Serial2Com2,
Serial1Com2Serial2Com1, Com1, Com2
Description
Sets the port address of the serial devices.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
default, Serial Device 1 is set to COM port 1 and Serial Device 2 is set to COM port 2.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
alternate, Serial Device 1 is set to COM port 2 and Serial Device 2 is set to COM port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Applicable Systems Dell’s 11th generation PowerEdge and later systems
86