CLI Guide

Example:
A:>syscfg --sata7=auto
sata7=auto
Applicable Systems All PowerEdge systems.
SataPortJCapacity*
Table 179. SataPortJCapacity
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undened for removable-
media devices such as optical drives.
Example:
A:>syscfg --SataPortJCapacity
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortJDriveType*
Table 180. SataPortJDriveType
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortJDriveType
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortJModel*
Table 181. SataPortJModel
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortJModel
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SecurityFreezeLock
Table 182. SecurityFreezeLock
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
Sends the Security Freeze Lock command to the embedded SATA drives during power-
on self-test (POST). The option is applicable only to ATA and AHCI, and not to RAID.
Example:
A:>syscfg --SecurityFreezeLock=Enabled
SecurityFreezeLock=Enabled
84