CLI Guide

SataPortDModel*
Table 157. SataPortDModel
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortDModel
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortE / sata4
Table 158. SataPortE / sata4
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: auto, o
• On Dell’s 12th generation PowerEdge and later systems: O, Auto
Description
Turns the SATA port 4 to auto or o. This option can be replicated.
Example:
A:>syscfg --sata4=auto
sata4=auto
Applicable Systems All PowerEdge systems.
SataPortECapacity*
Table 159. SataPortECapacity
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undened for removable-
media devices such as optical drives.
Example:
A:>syscfg --SataPortECapacity
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortEDriveType*
Table 160. SataPortEDriveType
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortEDriveType
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortEModel*
Table 161. SataPortEModel
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
79